Releases via build.snapcraft.io failing mysteriously

build.snapcraft.io is behaving somewhat erratically for me this afternoon. The main issue is that when a snap is built, some architectures fail to release:

But when I go to https://dashboard.snapcraft.io/snaps/ammp-edge/ in order to check what the reason is, failing releases don’t appear in there at all:

Any ideas?

2 Likes

You can find more detailed logs via https://launchpad.net/~build.snapcraft.io to https://launchpad.net/~build.snapcraft.io/+snaps and then https://launchpad.net/~build.snapcraft.io/+snap/908277a77436b2b858d32d6cd0bc859a-xenial

Specifically…
https://launchpad.net/~build.snapcraft.io/+snap/908277a77436b2b858d32d6cd0bc859a-xenial/+build/337117

Looks like an infra issue.

" Store upload failed: (‘Connection aborted.’, gaierror(-3, ‘Temporary failure in name resolution’)) "

@cjwatson ^

One of our job runners had become confused, but I’ve fixed it and future uploads will succeed. Thanks for the report.

2 Likes

Great, thank you both for the rapid response! And @popey thanks also for the pointer re. the detailed (post-build) logs, will keep it in mind for the future.

@wgrant I’m having a similar issue currently with another snap, though this time it appears to be an out-of-memory issue on a runner. E.g. from https://launchpad.net/~build.snapcraft.io/+snap/7f1dda0cd13a5bdac7ff338d5054836f-xenial/+build/339312

Store upload failed: [Errno 12] Cannot allocate memory

I’ve re-triggered the build and will hopefully have better luck in a bit, but wanted to flag.

1 Like

I’d like to mention that the similar problem occurred to me few times recently: